Home » Filtration and Solutions » Dust Collector Spares » Dust Collection Pleated Filter Cartridge » Bayonet Type Filter Cartridge
BAYONET TYPE FILTER CARTRIDGE
BAYONET as the name suggests is a twist lock type filter. This can be mounted from the bottom side (Dirty Air Side) of the cell plate. BAYONET locking system gives the ease of quickly changing or quickly mounting the filter cartridges into the dust collector. In case a shutdown is planned and if you have bayonet-type filters the overall filter change-out time or the overall shutdown time of the dust collector reduces very highly because to change or to remove or to put back the filters you don’t need any specialized tools all you need to do is twist the filter to unlock it, clean it or change it and when you put it back u just need to twist it to lock it again.
A cylindrical circular gasket is provided within the bayonet filter to seal it properly with the dust collector cell plate. This Filter is available in several configurations of diameter and height. The Bayonet Filter can only be made in metal and cannot be made in plastic.
- 225 mm
- 325mm
BAYONET TYPE FILTER CARTRIDGE | |
Diameter | 225 |
Fitment Mode | With Metal Fingers |
Installation mode | Dirty Air Side (Bottom Entry) |
Standard height | 300,330,500,600,660,1000 mm |
Maximum height | 1000 mm |
Cap MOC | GI , SS 304 |
Inner Cage Moc | Perforated and Expanded GI, SS304, SS 316 , Aluminium |
Surface area per 1000 mm Height | Upto 6 sqm |
Seal | EPDM Rubber Gasket |
*Length can be customized as well.
Standard Pleat Configuration and Area per meter of length.
Pleat Depth/ No.of Pleat | 45 | 48 |
105 | 9.45sqm | 10.08sqm |
125 | 11.25sqm | 12sqm |
145 | 13.05sqm | 13.92sqm |
*The area has been calculated for 1000mm filter.
Diameter | 325 mm | ||||
Fitment | Through tie rod bolting | ||||
Installation mode | Dirty Air side (Bottom Entry) | ||||
Standard Height | 300, 330, 500, 600, 660, 1000 mm | ||||
Maximum Height | 1000 mm | ||||
cap MOC | GI,SS 304 | ||||
Inner cage MOC | Perforated and Expanded Gl, SS304, SS 316, Aluminum | ||||
Surface area per 1000 mm Height | 16 sqm | ||||
Seal | EPDM Rubber Gasket |
*Length can be customized as well.
Standard Pleat Configuration and Area per meter of length.
Pleat Depth/ No.of Pleat | 45 | 48 |
105 | 9.45sqm | 10.08sqm |
125 | 11.25sqm | 12sqm |
145 | 13.05sqm | 13.92sqm |
165 | 14.85sqm | 15.84sqm |
185 | 16.65sqm | 17.76sqm |
*The area has been calculated for 1000mm filter.
Filter Media Finishes
Flame Retardant Finish
Oil & Water Repellent Finish
Nano Fiber Coated Finish
Anti-Static & PTFE Membrane Lamination
- Benefits with Pleatofil®
- Filter Media
- Application
- Accessories
- Uniform Pleat Spacing
- Precise Cap Dimensions
- High Strength Pleat Support Bands.
- Wide Choice of Filter Media.
- Quick Customisation inhouse tool & design building.
Pleated Filter Media | |||
Fabric Code | MOC | Finishing | GSM |
PESB260-UJCA-0UT | Polyester Spunbond Bi Component | Untreated | 260 |
PESB260-UJCA-BUT | Polyester Spunbond Bi Component | Untreated Black | 260 |
PESB260-UJCA-0WR | Polyester Spunbond Bi Component | Oil & Water Repellant | 260 |
PESB260-CKBM-0FR | Polyester Spunbond | Fire Retardant | 260 |
PESB260-CKBM-AFR | Polyester Spunbond | Anti-static, Fire Retardant | 260 |
PESB260-CKBM-0AS | Polyester Spunbond | Anti Static | 260 |
PESB170-CKBM-0UT | Polyester Spunbond | Untreated | 170 |
PESB170-CKBM-0WR | Polyester Spunbond | Oil & Water Repellant | 170 |
PESB170-CKBM-0AS | Polyester Spunbond | Anti Static | 170 |
PESB260-HFCA-NFR | Polyester Spunbond Bi Component | Nano Fiber Coated + Flame Retardant | 260 |
CPBM130-CKCR-0UT | Cellulose Polyester Blended | Untreated | 130 |
CPBM122-HFCR-NFR | Cellulose Polyester Blended | Nano Fiber Coated + Flame Retardant | 122 |
- Paints & Pigments
- Metals & Minerals
- Shot Blasting
- Cement
- Chemicals
- Powder coating
- Steel & Power
- Pharmaceuticals